COMPLETE SYSTEMS

February 4, 2017
SizeReduction.jpg

Introducing complete systems for processing tires for Tire Derived Fuel, Tire Derived Aggregate & Crumb Rubber Feed Stock.


Multiple size systems available from 3 ton per hour to 20 ton per hour. Turnkey systems that can be delivered with all stands, platforms, conveyors and come completely pre-wired to quickly have you operational.

Turnkey Systems with Patented Knife Designs for processing tires for Tire Derived Fuel, Tire Derived Aggregate and Crumb Rubber Feed Stock






Features & Benefits


  • Patented “MULTI-STACK” & “DOUBLE-STACK” knife configurations
  • Close knife to knife tolerances
  • Cleanest cuts in the industry
  • Re-sharpenable knives provide for the lowest operating cost possible.
  • Energy efficient
  • Multiple horsepower ratings available
  • Patented screening systems for consistent sizing
  • PLC HMI touch screen controls


Service and Technical Support

Refurbished & Rebuilt Equipment



Customer Service is Second to None – With In Stock Guarantee

We carry a complete line of replacement parts for all CM Tire Processing Equipment with shipping on standard parts within 24 hours.

Our dedicated Customer Service Team is available to take your part orders via e-mail, telephone or fax. We use various freight carriers to ensure you will receive your package on time and at the lowest cost.

We also provide Field Service Technicians support if your equipment needs maintenance or repairs. Depending on location, our technicians can generally be on your site within 24 hours.


February 4, 2017
CM_Zero_Waste_System.jpg

Wire Free ground rubber for TDF, Mulch, Playground Material, Crumb Rubber Feed Stock and Pyrolysis.


Introducing the CM Liberator – The Ultimate in Wire Separation Technology

The Liberator’s unique design allows for the separation of wire and rubber in the purest form possible, allowing processors to realize revenue from both rubber and wire. Additional purity of the wire can be achieved through the addition of CM’s Zero Waste System, which screens the wire to further separate contaminate to 5% or less, which creates a higher value market for the wire.

Available in 2 system options






Features & Benefits


  • Patented Serrated knife configuration for maximum cutting area
  • Reversible screens
  • Low shaft RPM to reduce operating temperature
  • Additional revenue generation
  • Elimination of waste
  • Multiple market opportunities


Service and Technical Support

Refurbished & Rebuilt Equipment



Customer Service is Second to None – With In Stock Guarantee

We carry a complete line of replacement parts for all CM Tire Processing Equipment with shipping on standard parts within 24 hours.

Our dedicated Customer Service Team is available to take your part orders via e-mail, telephone or fax. We use various freight carriers to ensure you will receive your package on time and at the lowest cost.

We also provide Field Service Technicians support if your equipment needs maintenance or repairs. Depending on location, our technicians can generally be on your site within 24 hours.


February 4, 2017
Granulation.jpg

CM Granulators’ use V-Force knife technology to reduce material size and liberate fiber. The granulator processes metal free materials while liberating fibrous material and preparing it for separation.


Product size can be easily changed with these highly versatile systems.

CM Granulators are heavy duty and built specifically for processing tire rubber and other materials. The machine has an all welded frame which utilizes a replaceable wear liner. The rotor is made of wear resistant steel, and the knives and screens are easily accessible through hydraulically powered access doors. Bearings are located outside of the cutting chamber to insure years of trouble free operation.

The CM Granulator can process > ¾” [19 MM] wire free rubber into ground rubber that is > 3/8” [9 MM] in size. During this process the majority of the nylon fiber is separated and ready for removal. The CM Granulator is utilized in Stage 3 crumb rubber processing systems. This material can be used for a variety of products including granulate for field turf, running tracks & molded products, rubber molding, or further processed to fine ground rubber by Stage 4 processing systems.






Features & Benefits


• V-Force knife technology

• Quality grind with minimal fines

• High output

• Hydraulically powered access doors

• Resharpenable / reusable knives



Service and Technical Support

Refurbished & Rebuilt Equipment



Customer Service is Second to None – With In Stock Guarantee

We carry a complete line of replacement parts for all CM Tire Processing Equipment with shipping on standard parts within 24 hours.

Our dedicated Customer Service Team is available to take your part orders via e-mail, telephone or fax. We use various freight carriers to ensure you will receive your package on time and at the lowest cost.

We also provide Field Service Technicians support if your equipment needs maintenance or repairs. Depending on location, our technicians can generally be on your site within 24 hours.


February 4, 2017
Milling.jpg

CM Dual Drive™ Crackermill sets the standard in high production fine grind systems.


Advanced Dual Drive™ rolls process clean rubber that is 1/4” – 5/16” [6 – 8 MM] in size, to material sizes that are 10-80 mesh [2000 – 177 microns].

The Dual Drive™ Crackermill produces more fine rubber for the tire recycling industry than all other competitive systems combined. The unique cutting action is produced by two large counter rotating rolls that crack and mill the rubber to the desired size. Each roll is independently driven and operates at different speeds. Variable frequency drive controls (VFD) allow the speed of each roll to be varied. This differential in speed between the rolls is referred to as the “Friction Ratio”. Due to the mills ability to vary its friction ratio, performance capabilities are optimized.

All systems are operated by a PLC control system with feedback capabilities which allows the system to be monitored and its performance enhanced.






Features & Benefits


• Twin independent drives to achieve optimal friction ratios

• Variable speed vector drives

• Heavy duty oil bath gear reducers

• Hardened cast iron rolls

• Rolls can be re-sharpened up to 3 times

• Heavy duty extended life bronze bearings

• Optional water cooled bearing housings for longer bearing life

• Water cooled rolls

• Automated PLC controls fully integrated to control bearing lubrication, temperature and chilled water system



Service and Technical Support

Refurbished & Rebuilt Equipment



Customer Service is Second to None – With In Stock Guarantee

We carry a complete line of replacement parts for all CM Tire Processing Equipment with shipping on standard parts within 24 hours.

Our dedicated Customer Service Team is available to take your part orders via e-mail, telephone or fax. We use various freight carriers to ensure you will receive your package on time and at the lowest cost.

We also provide Field Service Technicians support if your equipment needs maintenance or repairs. Depending on location, our technicians can generally be on your site within 24 hours.


All CM Equipment is proudly made in the USA at our Sarasota, Florida factory


Company

CM Recycling Equipment

A Columbus McKinnon brand

Corporate Headquarters: +1 941.755.2621

Customer Service : +1 941.753.2815

For more than 35 years, CM Recycling Equipment has been the recognized leader of recycling equipment solutions.

CM Recycling Systems process more than half a billion tires each year worldwide and continues to grow. CM Recycling Equipment is a wholly owned subsidiary of Columbus McKinnon Corporation, an American manufacturing company founded on the tradition of building top quality material handling systems since 1875.

Corporate headquarters are located in Getzville, NY with offices and manufacturing facilities worldwide. Columbus McKinnon is publicly traded on the NASDAQ, symbol CMCO.



(Optional) Subscribe to CM Newsletter

No SPAM! We never share email to any 3rd part companies!

Lorem ipsum dolor sit amet, consectetur adipiscing elit.

Thank You for Subscription!

2018 © Copyright CM Recycling Equipment. All rights reserved.

Refurbished Equipment

CM offers equipment that has been refurbished at the CM factory by utilizing the frames and cutting box chambers of out of service machines. The frames and boxes are completely sandblasted, primed and repainted to be reused in building the refurbished machine. The refurbished equipment can be outfitted with new conveyors, safety and maintenance platforms and jib crane for ease of maintenance. All CM refurbished equipment comes with a full one year warranty on parts and service.

Rebuilt Equipment

Additionally, CM is a full service provider for our existing customers who wish to extend the life of their equipment by offering rebuilds on any part or for the entire machine. This can be as simple as a new set of shafts or as detailed as rebuilding and/or updating the entire machine. This service is offered on all existing CM Equipment.

  • Welcome, exit popup window
  • Social network sharing locker
  • Smart newsletter opt-in system
  • Full popup window customizing
  • Page level Targeting
[X] Close this popup

To receive the latest Refurbished Equipment inventory sheet or to request a quote for Rebuilt Equipment use form below.

Your Information will never be shared

(Optional) Subscribe to CM Newsletter

No SPAM! We never share email to any 3rd part companies!

Lorem ipsum dolor sit amet, consectetur adipiscing elit.

Thank You for Subscription!

2018 © Copyright CM Recycling Equipment. All rights reserved.

Refurbished Equipment

CM offers equipment that has been refurbished at the CM factory by utilizing the frames and cutting box chambers of out of service machines. The frames and boxes are completely sandblasted, primed and repainted to be reused in building the refurbished machine. The refurbished equipment can be outfitted with new conveyors, safety and maintenance platforms and jib crane for ease of maintenance. All CM refurbished equipment comes with a full one year warranty on parts and service.

Rebuilt Equipment

Additionally, CM is a full service provider for our existing customers who wish to extend the life of their equipment by offering rebuilds on any part or for the entire machine. This can be as simple as a new set of shafts or as detailed as rebuilding and/or updating the entire machine. This service is offered on all existing CM Equipment.

  • Welcome, exit popup window
  • Social network sharing locker
  • Smart newsletter opt-in system
  • Full popup window customizing
  • Page level Targeting
[X] Close this popup

To receive the latest Refurbished Equipment inventory sheet or to request a quote for Rebuilt Equipment use form below.

Your Information will never be shared

(Optional) Subscribe to CM Newsletter

No SPAM! We never share email to any 3rd part companies!

Lorem ipsum dolor sit amet, consectetur adipiscing elit.

Thank You for Subscription!

2018 © Copyright CM Recycling Equipment. All rights reserved.

Refurbished Equipment

CM offers equipment that has been refurbished at the CM factory by utilizing the frames and cutting box chambers of out of service machines. The frames and boxes are completely sandblasted, primed and repainted to be reused in building the refurbished machine. The refurbished equipment can be outfitted with new conveyors, safety and maintenance platforms and jib crane for ease of maintenance. All CM refurbished equipment comes with a full one year warranty on parts and service.

Rebuilt Equipment

Additionally, CM is a full service provider for our existing customers who wish to extend the life of their equipment by offering rebuilds on any part or for the entire machine. This can be as simple as a new set of shafts or as detailed as rebuilding and/or updating the entire machine. This service is offered on all existing CM Equipment.

  • Welcome, exit popup window
  • Social network sharing locker
  • Smart newsletter opt-in system
  • Full popup window customizing
  • Page level Targeting
[X] Close this popup

To receive the latest Refurbished Equipment inventory sheet or to request a quote for Rebuilt Equipment use form below.

Your Information will never be shared

(Optional) Subscribe to CM Newsletter

No SPAM! We never share email to any 3rd part companies!

Lorem ipsum dolor sit amet, consectetur adipiscing elit.

Thank You for Subscription!

2018 © Copyright CM Recycling Equipment. All rights reserved.

Refurbished Equipment

CM offers equipment that has been refurbished at the CM factory by utilizing the frames and cutting box chambers of out of service machines. The frames and boxes are completely sandblasted, primed and repainted to be reused in building the refurbished machine. The refurbished equipment can be outfitted with new conveyors, safety and maintenance platforms and jib crane for ease of maintenance. All CM refurbished equipment comes with a full one year warranty on parts and service.

Rebuilt Equipment

Additionally, CM is a full service provider for our existing customers who wish to extend the life of their equipment by offering rebuilds on any part or for the entire machine. This can be as simple as a new set of shafts or as detailed as rebuilding and/or updating the entire machine. This service is offered on all existing CM Equipment.

  • Welcome, exit popup window
  • Social network sharing locker
  • Smart newsletter opt-in system
  • Full popup window customizing
  • Page level Targeting
[X] Close this popup

To receive the latest Refurbished Equipment inventory sheet or to request a quote for Rebuilt Equipment use form below.

Your Information will never be shared